Masterlink connection via cat5/6 patch panel

I am moving house and planning the new installation of my sound system. I LOTS of masterlink cable which I have had for a while and would like to use it. I have installed an Ethernet network in the house - cat 5e for data. I was thinking of adding a separate patch panel in the cabinet to connect all the masterlink cables together. It would be a star system with all the cables coming back to the central hub. None of the items will be too far away so the cable runs will only be 30-50 meters max. The equipment I am installing is:

3200

3 x 2000

1 x active box with 4000's

1 x passive box

1 x PC link

appreciate advice - will the patch panel solution work? Do I need to add a switch?

tony

Are you in the United States?

Where?

I'm in the UK

The masterlink distribution box should work perfect. All items connected are done so in parallel so it is just like having once constant run.

I have 4 in my home now.

2 Netlink distribution and 2 masterlink.

Essentially I have 2 Star rooms (one supports 3 passive sand a beomaster 5) the other all supper televisions and link rooms.

The punch down for connection at the termination end is very simple.

Good luck!!!