Beogram 6002 motor noise

Reply

aymeric Posted: Wed, Feb 12 2014 8:43 PM

rated by 0 users

HI all

I have aquired a beogram 6002 but the motor is making a sort of clicking noise while rotating. It does rotate good though. 

The noise is also there when i turn the motor by hand, so i don't think it has anything to do with old caps.The motor can only turn to one direction, when i try gently to turn it the wrong side it is stuck there. is that normal?

Does anybody know if this is fixable or do i need a new motor? 

If needed, i can record it.

Reply

Dillen replied on Wed, Feb 12 2014 8:46 PM

rated by 0 users

The clicking sound usually comes from a deformed commutator and/or worn or even broken brushes inside the motor.
A replacement motor will almost certainly be the only way.

Martin

Reply

aymeric replied on Wed, Feb 12 2014 8:48 PM

rated by 0 users

Martin,

I was afraid of that :(
Do you have a spare motor for sale? Or is it the same motor i have in my beogram 1700?

Thanks 

Reply

Dillen replied on Wed, Feb 12 2014 9:01 PM

rated by 0 users

Sadly, no and no.

Martin

Reply

aymeric replied on Wed, Feb 12 2014 9:06 PM

rated by 0 users

No problem. if anybody else has a spare one please contact me :) 

Reply

jenku replied on Wed, Jan 30 2019 9:36 AM

rated by 0 users

Hej aymeric

I just read about Your problem with the platter motor.

I can't help You but You can help me!

I also have a problem with the platter motor, but a different one.

All the four wires are broken off and I have no clue where I have to solder them back.

I therefore ask if You would be so kind as to send me a picture of the soldering side of the motor PCB with all four wires attached.

Hope to hear from You.

regards

jenku

Reply

aymeric replied on Wed, Jan 30 2019 10:02 AM

rated by 0 users

i'm sorry i don't have a clue how it's soldered, it's a long time ago and i don't have that equipment anymore