ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi! I own a Beomaster 2400-2 and just bought a beogram 4004 which is supposed to collaborate with my Beomaster through the Datalink 7pin DIN connector.
The DINcable from the turntable is soldered to the PCB inside. From what I understand the 2 extra pins in the DINconnector were removable.
The previous owner of the 4004 have removed the 2 extra pins.
So my question is if anybody here has a pair of there removable pins or any simple trick to get this to work.
Best Regards.
/Petter