Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 4 PLink model

rated by 0 users
This post has 1 Reply | 0 Followers

Douglas
Not Ranked
Edinburgh & Essen, Germany
Posts 58
OFFLINE
Bronze Member
Reply
Douglas Posted: Sat, May 17 2014 10:21 AM

Hi Everybody, Im hoping someone can help me with a problem I have with a Beolab 4 which I bought,

there is a loud distorted noise as soon as it gets a signal worse with a Line/PC input, Ive opened it up and it looks clean enough! Anybody got any ideas on which module could be causing the problem?

regards Douglas

Aussie Michael
Top 25 Contributor
Melbourne, AU
Posts 3,730
OFFLINE
Bronze Member
Reply
Aussie Michael replied on Sat, May 17 2014 11:46 AM
The only time I have had a distorted noise from my BL4pc is when I plugged them into an airport express without any volume control

If I plug them directly into the PC via a 3.5 mm jack there is no issue.
Page 1 of 1 (2 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly