ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I have just purchased a Beo6 and was wondering if anyone has any advice on programming?
Do's and don'ts and in particular where? I am not completely confident with my local dealer here in Stockholm.
Any advice appreciated.
Tack.
Well, if you have the time and will to learn <i would recommend to get a copy of the Config program and do the configuration yourself.
My B&O products: Beosound 9000, Beosound 2300, Beosound Century, Beolab 8000, Beolab 6000, Beolab 4000 x2, Beolab 3500, Beolab 2000, Beolab 10, Beolink Active x2, Beotime, Beo5 x2, Beo4, A9 keyring x2, LC2 dimmer x6 and growing....
Hi,
Has anyone got step by step configuration procedure ?
Thanks
You may wish to look in the Beo5/6 Resource Centre HERE along with other useful information in the WiKi section, see menu above
Regards Keith....
I'm willing to learn and do the config on my own.
I went to the wiki and scanned the IR-code of my remote with a HP iPAQ, but now I'm stuck I can't gind how to get the scanned code into the XML Config Tool.
If anyone has a good advice, I would greatly appriciate.
Thanks guys
gerard