ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
just installed another LC2 that I had in the same room as another one and now I would like to set this up as a specific LAMP to be able to control the two LC2s individually.
However, I seem unable to do this with my Beo4 (although I have done it in the past) so I wondered if someone could walk me through the process (the exact buttons to press on the Beo4).
I have tried touching the dome, pressing LAMP, STORE, number, STORE but that does not work.
The exact buttons I pressed were (touching the dome throughout the process):
LIGHT
LIST (until I get the LAMP command)
GO
LIST (until I get the STORE command)
Number (2 in this case)
(the other LC2 is responding to LAMP 1 commands but this new LC2 does not respond to any LAMP commands)
BR
Riven
My B&O products: Beosound 9000, Beosound 2300, Beosound Century, Beolab 8000, Beolab 6000, Beolab 4000 x2, Beolab 3500, Beolab 2000, Beolab 10, Beolink Active x2, Beotime, Beo5 x2, Beo4, A9 keyring x2, LC2 dimmer x6 and growing....
http://www.bang-olufsen.com/da/customer-service/product-support/accessories/beolink/light-control-2
Thanks, was unable to find a Beo4 version of the LC2 manual but here it was! Will try it tomorrow.
(should have gone to B&O directly)