Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolink 7000: "TV" source does not work (button on touchscreen)

rated by 0 users
This post has 3 Replies | 1 Follower

TWG
Top 75 Contributor
Posts 1,672
OFFLINE
Gold Member
TWG Posted: Thu, Mar 3 2016 6:49 AM

Hello,

I've bought a Beolink 7000 and it's such a beautiful and impressing device.
But: The source button "TV" on the touchscreen does not work. There's no reaction. Can the touchscreen be partially defective?

Is there any chance to test if 2 way control works WITHOUT 2 way equipment? :-)

Die_Bogener
Top 500 Contributor
Posts 192
OFFLINE
Bronze Member

Some TV do not react the right way when they are adressed in the wrong mode. A one way tv will not startup on two way commands and sometime also the other way round...

Remove TV in components and add it again. During this configuration the BL7000 will decide one/two way depend on the modus... and wether two way is still working.

Die_Bogener
Top 500 Contributor
Posts 192
OFFLINE
Bronze Member

double...

Carolpa
Top 75 Contributor
Posts 1,700
OFFLINE
Silver Member
Carolpa replied on Thu, Mar 3 2016 7:05 PM

TWG:
Is there any chance to test if 2 way control works WITHOUT 2 way equipment? :-)
the only way to control without 2 way equipment is to switch to 1 way on the BL7000 (than it acts as a huge BL1000)

Page 1 of 1 (4 items) | RSS