Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

No sound from Beolab 7-4

rated by 0 users
This post has 5 Replies | 3 Followers

dilksie
Not Ranked
Posts 1
OFFLINE
Bronze Member
dilksie Posted: Sat, Jul 16 2016 5:28 PM

Hi, apologies if I have posted in the wrong forum.

I have a Beovision 7-40 linked to a Beolab 7-4 and a pair of Beolab 6000's. All was working fine until a couple of weeks ago when the 7-4 stopped producing any sound!! On switching on the speaker clicks and the led on the rear of the unit turns green. I have re-configured the set up to use the 6000's from the center channel (stereo rather than 2.1) but would like to get the 7-4 working again. Can anyone point me towards what the problem may be? 

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Sat, Jul 16 2016 6:34 PM
I have a 7-4 that fortunately has not had any problems. I am sorry I do not have any suggestions for you. I thought perhaps the PL cable was loose but as the LED changes color that does not seem to be it.

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Gerhard
Not Ranked
Germany
Posts 3
OFFLINE
Bronze Member
Gerhard replied on Wed, Jan 26 2022 5:55 PM

Hallo dilksie,

I have purchased a Beolab 7-4 second hand. It arrived very well packed, but unfortunately it shows the same behaviour as you have described in your question.

Did you find any solution for this issue?

Best regards

Gerhard

Ravsted
Top 200 Contributor
Denmark
Posts 345
OFFLINE
Bronze Member
Ravsted replied on Wed, Jan 26 2022 7:25 PM

Hi, 

Do you have other BeoLab speakers in your home ? 

If yes, swob one of those speakers with the BL7-4. 

You'll be able to rule out misconfiguration of the TV, bad cables etc. 

Regards 

R.

Gerhard
Not Ranked
Germany
Posts 3
OFFLINE
Bronze Member
Gerhard replied on Thu, Jan 27 2022 10:30 AM

Hallo,

for testing I have removed the powerlink and power cables from a Beolab 8000 and plugged them into the Beolab 7-4.

On the other end of the powerlink cable there is a Beovison 7-32.

When I switch the system on the LED on the back side of the Beolab 7-4 changes from red to green, and there is a click. But no sound from the speaker. The other Beolab 8000 is playing sound.

Yesterday in the evening I switched on again and to my surprise it worked. But today no sound again.

Before I had connected the Beolab 7-4 with a powerlink cable to my Beosound 9000. Also green LED but no sound.

Best regards

Gerhard

 

Gerhard
Not Ranked
Germany
Posts 3
OFFLINE
Bronze Member
Gerhard replied on Sat, Jan 29 2022 5:09 PM

Hallo,

the Beolab 7-4 has played two times in the evenings. One day I have listened about an hour to it. Good sound quality. But unrotunately no sound to other times.

Any ideas how to fix this issue and reanimate this nice speaker?

Best regards

Gerhard

 

 

Page 1 of 1 (6 items) | RSS