ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi... One of my LC2's in my livingroom, has begun jo just turn off the light by itself.
It suddenly dims the light(like pressing light+stop), and then it can be turned on again(light+light). After some time, it dims again, and this can be repeated some times.
After x times, it will not turn on again, until it has been off for a while.
Is there a protection circuit that turns off if it gets to hot, or is this perhaps just a bad solder somewhere ?
/Weebyx
Hi,
there is indeed a thermal protection in the LC2.
So i guess tere might be thermal problem with the dimmer.
It's a NTC with 100K which should be mounted in such a way that it has thermal contact to the cooling plate / heatsink .
Ralph-Marcus