ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi!
Probably a easy question for some b&o pros on this site. I have a Beosound 3000 in livingroom and i would like to connect it to an Beovision avant 32 vcr model in the bedroom via my allready existing cat 6 cable with this written on it:
plasticavi - belcom - 36/2008 - UTP 2(4x2x24 AWG) - category 6 extended frequency 350 Mhz 100 ohm - ISO/IEC
Is it possibel?
I am new in the magnificent world of b&o and wondering if it works like this when connected: I want to listen to cd from the BS 3000 in my livingroom, i just press cd on the beo4 while in bedroom and the music comes to me. And if i then move myself to the livingroom and also there want to listen to the same music, i just press cd there and it will activate my beolabs 8000?
Robert
Masterlink the 2 systems.
Then use RJ45 to Masterlink Cables.
Did this myself, works great!
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).