ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi guys! I've seen how to replace the covers on beolabs 9, but my 20s are certainly different. Any suggestions on how to replace the covers on the beolab 20s?
-Thanks-
The beginning of this video should help:
https://www.youtube.com/watch?v=hR-uLjeGhBM&list=PLRPmJ785xnMhlDeGZqI5nQ-ledZFXS94z
I watched a technician disassemble my BL20s at my home for warranty work, and he didn't use the sock at all, but did use the peeler. A note in putting the grills back on, press firmly along the lower sides to ensure the lower fret prongs engage, then do the same on the upper portion to ensure the upper prongs engage. Without the grill in firm placement, the gray top cap (with the etched BANG & OLUFSEN logo) won't seat appropriately.
Good Luck!
Wow, thank you very much for the quick reply! The video was very helpful. I'm planning on replacing the fabric myself with the same color (white), just brand new (mine has some cuts and stains). I'll post some pictures when I do it and share my experiences.
Thanks again!