Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Phase Link replacement - BeoVox S75

rated by 0 users
This post has 1 Reply | 0 Followers

OG10
Not Ranked
Posts 1
OFFLINE
Bronze Member
Reply
OG10 Posted: Sun, May 6 2018 11:54 AM

Hi Guys, 

 

I have had a BeoVox S75 for 16 years.. second hand. I went through a period of updating all the Peerless and SEAS sub drivers. However the Phase Link 12.5cm driver was always kept off my list since I couldn't find any replacements at the time. Would and of you know if there is anything out there that can replace this driver? One of the ones I have is extremely cracked around the edges. I'd love to keep these speakers going for a bit longer :)

Saint Beogrowler
Top 150 Contributor
Saint Paul
Posts 780
OFFLINE
Bronze Member
Reply
Saint Beogrowler replied on Sun, May 6 2018 2:49 PM
OG10:

Hi Guys,

I have had a BeoVox S75 for 16 years.. second hand. I went through a period of updating all the Peerless and SEAS sub drivers. However the Phase Link 12.5cm driver was always kept off my list since I couldn't find any replacements at the time. Would and of you know if there is anything out there that can replace this driver? One of the ones I have is extremely cracked around the edges. I'd love to keep these speakers going for a bit longer :)

What do you mean by “updating”? The drivers are very specific to the cabs. Repairing damaged drivers or replacing from donor units is the way to go. I think there is one on eBay right now.

Page 1 of 1 (2 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly