ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello everyone.
I own a B & o 5.1 surround system with beosystem 3.
I want to connect my turntable to the BS3 (reloop 7000), I connected the RCA cables to the input of an amplifier (and so far the signal works), and then connected to the BS3 output in the Av6 socket (RCA inputs). I have configured the socket as CAMERA, however when I call the CAMERA source from my Beo4 remote control, no sound comes out. What am I doing wrong?
same results if i try to connect my iphone with the minijack
thanks everyone
Hi and welcome to Beoworld
Did you go through the configuration steps for the AV6 input in the menu?
MM
There is a tv - and there is a BV
I suppose so...
I made some attempts and i noticed that the audio source (spdif/rca) works only if there's also an hdmi connection active in the same source.
The strange things is that another BS3 that i have in my parent's house works flawlessy without this workaround.
is it related maybe because i have connected a non B&O screen to my setup?
Is your parent's Beosystem 3 connected via Masterlink to other devices or stand alone? Are both (yours and your parent's) BS3 the same variant (MK1, MK2 or MK3)?
The beosystem 3 are both MK1.
Both have 5.1 b&o surround system, in my case Beosound9000 via masterlink, in my parents, Beocenter2.
They have beovision 4-50, in my case LG monitor...