Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beomaster 3000 Idle current in one channel not adjustable

rated by 0 users
This post has 5 Replies | 1 Follower

Andreas
Not Ranked
Germany
Posts 18
OFFLINE
Bronze Member
Andreas Posted: Fri, Jan 17 2020 12:08 AM

Hello everybody,

I changed the Trimmer and all caps on the board of an Beomaster 3000. All works fine... Sound plays in both channels, but I cant adjust the Idle Current on left side. I measure 20mA and it's not adjustable. The other side is not a problem.

What is the reason for this. Can anyone help me?

Thanks very much

Andreas

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Dillen replied on Fri, Jan 17 2020 6:53 AM

The resistors close to the trimmer (circuitwise) are known to go high in value.
That often causes situations like this.

Martin

Andreas
Not Ranked
Germany
Posts 18
OFFLINE
Bronze Member
Andreas replied on Fri, Jan 17 2020 6:26 PM

Hi Martin, thank you for Tip. I measuer this weekend an post you results.

Have a nice weekend

Andreas

Andreas
Not Ranked
Germany
Posts 18
OFFLINE
Bronze Member
Andreas replied on Sat, Jan 18 2020 5:53 PM

Hi Martin, I measured all resistors arround. They look fine. R 482 has 720 instead of 560. The others are in spec.

Another Idea of this issue? Thanks for help

Andreas

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Dillen replied on Sat, Jan 18 2020 6:08 PM

Replace resistors 480 and 482.

Martin

Andreas
Not Ranked
Germany
Posts 18
OFFLINE
Bronze Member
Andreas replied on Mon, Jan 20 2020 5:53 PM

Hi Martin,

replaced and works. Thank you very much. You're great Smile

Andreas

Page 1 of 1 (6 items) | RSS