ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Greetings!
I am in need of some guidance of setting up Amplifier 1 with a pair of BOC106 and BeoLab 16. I can't get the Amplifier 1 to stay on for more than 3 seconds after I have powered up the Amplifier 1. The output to the BOC106 will stop, and the BeoLab 16 will continue to play with reduced output.
Currently, the Amplifier 1 is connected to a BeoSound Core via PL1. The BOC106 is connected to the Amplifier 1 with the two positive terminals twisted together and the negative terminal twisted together. I am going to test the Amplifier 1 with it directly connected to a Power Link on one of TVs and see what the result is when I'm off work today.
* The Amplifier 1 is set to PL1, Stereo, Stereo in the back panel. *
Your input is highly appreciated!