ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hey Guys,
Hope everyone is keeping well.
I recently acquired a 4004 turntable. Unfortunately I have to replace the DIN connector as it is broken and some of the wire were off.
Can anyone please tell me where the wires would go on a 5 pin DIN connector? These are the wire colours,
1) Red
2) Yellow
3) Blue
4) White
5) Black
6) Bare ground wires
I would be most grateful.
Thank you, Glenn
The Beogram 4004 DIN connector was originally a 7-Pin DIN plug. Pins 6 and 7 were removable as they were for remote control functionality from a Beomaster 2400 (only). Here is the Beogram 4004 DIN plug diagram.