Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Masterlink question

rated by 0 users
This post has 2 Replies | 0 Followers

kai
Top 200 Contributor
Posts 362
OFFLINE
Bronze Member
kai Posted: Thu, Oct 29 2020 12:05 AM

Have an old customer where there is an issue with the ml cable, it works fine in the main room but link system wont work, the cable goes outside the house and round the house then up to the attic. This was done nearly 15 years ago which I did not do all has worked until a powerful issue, which has now been resolved, but now link system wont work, I would like to use cat 6a f/ftp cable ext to replace the faulty cable I know this has been discussed many times, but cat6a should work ok? Or would you use masterlink, cost wise cat6a is cheaper and its older kit beosystem 3 to bvis 6, and bvis740 mk as well as a beosystem 2 connected to an old bvis 4, thoughts appreciated 

kimhav
Top 500 Contributor
Malmo, Sweden
Posts 314
OFFLINE
Bronze Member
kimhav replied on Thu, Oct 29 2020 9:48 PM

I would step up to CAT7 SFTP 600MHz/1200MHz installation cable which I used to wire up my house when performing a full renovation 2011. Just take a quick look at eBay.de and you'll find the cable there from several commercial sellers.

kai
Top 200 Contributor
Posts 362
OFFLINE
Bronze Member
kai replied on Fri, Oct 30 2020 1:33 PM

Hi thanks for the reply, I will have a look but for his needs cat6a is more than enough 

Page 1 of 1 (3 items) | RSS