ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello, I have a BeoSound 9000 and a BeoCenter 9500 in the same room. The two systems are connected to a Beolink. Two BeoLab 8000 loudspeakers are connected to the BC9500. I use a Beo4 as a remote control. I recently had both systems restored, which also deleted the programming. BS9000 is connected to the BeoLink via the Masterlink. An aux cable goes from the Beolink to the AUX input of the BC9500. I can control both systems via Beo4 (BC9500 directly and BS9000 via the link button) but I no longer receive any signals from the BS9000 on the Aux input of the BC9500. Does someone have a tip where the problem could be? Thanks in advance
Bruno