Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Problem with Beosound Century Door

rated by 0 users
This post has 4 Replies | 1 Follower

NeilH
Not Ranked
Posts 9
OFFLINE
Bronze Member
NeilH Posted: Thu, Jun 13 2013 1:53 PM

Hi everyone, hope you can help a newbie with a small technical question.  The door on my Century works most of the time, but every so often it doesn't open and just 'clicks' instead.  I can see the mechanism has moved across, but the door hasn't, so looks like the connection between them isn't always engaging.  If I leave it, it moves back and clicks back into the door, then works fine.  Is there a simple fix to this problem?  Thanks in advance for your help!

Chaka
Top 500 Contributor
Chicago
Posts 312
OFFLINE
Bronze Member
Chaka replied on Thu, Jun 13 2013 1:56 PM

 

Take the speaker covers orf & you will see clearly what the problem is Teddy Tiger.

Milos
Not Ranked
Belgrade
Posts 37
OFFLINE
Bronze Member
Milos replied on Thu, Jun 13 2013 2:40 PM

Looks to me like mechanical problem. Remove glass doors manualy and take a look. Just gently pull em off with some of strenght. I had similar issue but not same. Main were sensor problem. 

NeilH
Not Ranked
Posts 9
OFFLINE
Bronze Member
NeilH replied on Thu, Jun 13 2013 7:06 PM

Thanks Rex, could you tell me what I should be looking for?  

Chaka
Top 500 Contributor
Chicago
Posts 312
OFFLINE
Bronze Member
Chaka replied on Sat, Jun 15 2013 5:04 AM

The dark panel that has the display read out (above the CD/tape/radio/aux buttons) has the sensor there for the door.  If you take the speaker covers off you will see two screws on each side.  Take the panel off and clean the window and sensor.  Their might be an accumulation of dust?  It worked for me when I had a century a few years ago with the same problem.  Good luck.  Smile

Page 1 of 1 (5 items) | RSS