ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Would someone please remind me how to program this combination so that it does not switch the whole link system off when putting the attached TV to standby?
Thanks
David
I think that the LX5500 should be in Option 2, so press: STBY, PICTURE, 2, STORE on the BL1000. Hope this works!
TV is already in option 2!
I remember that old LX/MX Beovisions can be set to rare options (V.OPT) like 2.6 , 2.5 , 1.5....
I would try V.OPT 2.6. Press PICTURE 2 STORE 6 STORE.
Hope this helps.
Stefan
Thank you for the reply Stefan. These all work but do not correct the situation. The config guide says option 2 but has no mention of additional options to prevent entire link system standby.
Have you downloaded the manuals on here - a link!
Peter
Thank you for the link. Page 15 of the MCL2 installation guide gives details of programming the MCL2AV standby function but these depend on a sensor being attached and holding the timer button. It does not appear possible to do this without the sensor (I use the LX TV only) so I need to obtain one of these.