ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello all
I have a BV7 in my main room sending SD to my bedroom beovision3 over ariel and Masterlink.
today I purchased a Bv6-26 from eBay with no DVI or HDMI just to be able to access the SD and ML from the rest of the system. I am going to run in the cables this weekend to connect the TV to the rest of my setup but I wanted to make sure I run some future proofing in also while the ceiling is down.
i will run in
CAT6a for ML ( is this OK)
power
ariel cable
I wanted to protect for the future, what do you recommend in case i change the system. Should I run 2xcat7 (NETLINK, HDMI over cat7 and the above?
I am hoping the sound from bv6 will be enough as I have a music room for loud music but I can never rule out some speakers active or passive.
Your thoughts would be great :)
Eclipse 65V1-32Beosound M5Essence MK2BLI
Please do run the second cat cable too!
MM
There is a tv - and there is a BV
If you have the space, drop in some of that coiled trunking you can buy in rolls. Make sure you tape the fish wire onto both ends.