Question for Beocom 6000 owners...

Hi,

I'd like to know how the power adapters are connected to the pyramids? 

Are they attached or will I be able to disconnect them?

The reason I am asking this is because I may be able to buy a UK version, but would like to use them in continental Europe by changing the power adapters.

p.

Ours is a sealed unit. That is cable is imbedded into the pyramid and at the end imbedded into a two prong / \ Australian plug.

Perhaps wait for EU responses . . . . .

Assuming it is not a full base station and basically just the charger - the plug on the end should just twist off.

We got our pyramid charger from the UK and replaced it with the Australian version.

Works fine.

Peter

Thanks, that's what I thought unfortunately :-( 

 

The power cable is soldered inside the pyramid as you can see in this photo:

but at the other end of the cable (where it enters the PSU) it is actually a connector, so theoretically you should be able to buy just the PSU that plugs into the socket. You have to partially disassemble the PSU to connect the plug, however - not easy.

It's probably easier just to get on German eBay and find a new complete pyramid/PSU - I have bought a few there since moving from UK to Denmark and then Germany!

The newer (non-pyramid) chargers do have a power supply that disconnects at the base of the charger.