ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I'm trying to connect my BeoSound Essence with my BeoSound 3200. I have only two wireless speakers and want to distribute the music via my link system instead.
Bought a cable at my dealer . In my Essence, I have attached one end of cable to the Ethernet (RJ45) . The other end of the cable is connected to the AUX jack on the BeoSound 3200. When I put on my BeoSound 3200, there is no sound from the speakers. What could I have done wrong? Do I have to make any further setut ? If I instead use my BeoSound Essence stand alone with my two wireless speakers, it works fine .
On the essence put it in powerlink instead of ethernet.
BeoVision 11-55, BeoLab 8000, BeoRemote One BT, AppleTV 4, 2x BeoPlay A2, BeoPlay A1
I am not quite sure, but there might be some settings to be made in the BeoMusic app for the Essence.
When you have/have had your speakers connected wireless, you maybe have to tell the Essence, that it must send the sound through the RJ/PL.
Do check this, in case it won't work first time.
MM
There is a tv - and there is a BV
I tried to connect the cable to the PL1-jack on my BeoSound Essence but despite this it came no sound.
After that, I was connecting two BeoLab8000 speakers directly to my Essence through PL1- and PL2-jacks and then it came sound.