ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello BeoWorld,
somebody tried to repair an 8002 and decided to remove all the wiring from the DIN input board..
I am wondering if any of you guys has a photo of the board so that I can re-build the connection..
Thank for your help !
Adriano
Hi Adriano,
Your image didn't post correctly. Are you referring to this Beogram 8000 DIN board?
Sorry, I mis-read your post. You are looking for the Beogram 8002. The BG 8000 is similar but here are some pictures of the Beogram 8002 DIN board and wiring.
Here is a picture of the board
Here is another one.
What can I say... You saved my life :) lol
Thank you very much !!!!!!
I am doing a last check before plug the turnt
And I have noticed that the power cord was also misplaced... I did open the power supply cover and found the fuse BUT.. something doesn't look right .. I see a loose condenser and some connections that do not make a lot of sense.. it is evident that the previous person did remove the power cord ( did not put that back properly ) and at this point I don't trust anything anymore..
Sorry about this, but do you happen to have a photo of the power supply / fuse area ??
Here is a picture of one of mine.
Thank YOU , again.. problem solved :)