Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beogram 1203

rated by 0 users
This post has 3 Replies | 1 Follower

nev
Not Ranked
Posts 3
OFFLINE
Bronze Member
Reply
nev Posted: Tue, Apr 7 2015 1:40 PM

I get no response when the lift button is pressed. what's the prognosis without dismantling?

Søren Mexico
Top 10 Contributor
Mexico City
Posts 6,411
OFFLINE
Bronze Member
Reply
Søren Mexico replied on Tue, Apr 7 2015 1:46 PM

Oxidized contacts or failure in the relay

Collecting Vintage B&O is not a hobby, its a lifestyle.

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Tue, Apr 7 2015 2:11 PM

Or the motor has seized solid in its bearings due to dried lubricants.

Martin

nev
Not Ranked
Posts 3
OFFLINE
Bronze Member
Reply
nev replied on Tue, Apr 7 2015 2:16 PM

Thanks Soren I will get it out of the original carton where it has been in storage for some years and revisit the problem. Upon reading the forum could be that the motor oil is gummed up- it happened once before but in the reverse, that the oil was not viscous enough and ran away from the bearings was the feedback I got from the B&O distributor here in Melbourne. Will continue the thread when I have taken the plunge. Cheers Nev

Page 1 of 1 (4 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly