ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
planning to use a Beosystem 3 for home cinema reason in the living room where a BV10 alreay resides:
is it possibel to use the BV-Speaker as Center Speaker or do I have to install an additional speaker e.g. below to the TV ?
King Regards
Thomas
Hello Thomas,
did you search the (archived) forum on this subject?
http://archivedarchivedforum2.beoworld.org/forums/t/35319.aspx
It might be easier to use some sort of HDMI matrix/switch.
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Hi Ralf,
thanks for your suggestion, but my question is different to the linked one. I would like to use a beosystem 3 which controls my Beolabs and the beamer. I would like to use my BV10 as the primary display (beamer is the sencondary).
My question is: (how) can I use the build-in speaker of my BV10 as center in TV mode ?
The center in cinema mode will be another one.
Regards
I understand.
I was just thinking about "why use a BS3 AND a BV in one room", if you might be able to use the processor inside the BV instead of a BS3...?
So you want to use the HDMI out of the BS3 and the HDMI in of the BV10?
No idea how this could work (option settings?)....
The only 'solution' I could think of, would be to connect all external speakers to the BSys3 and the HDMI-out (of the BSys3) - using a HDMI splitter - to the BV10 (HDMI-in/call it ? V.Mem) and your projector.
One of the devices would have to be in Option4, then - in order to control them in the same room.
N.B. The speaker of the BV10 would not be a 'real' center speaker, since it would work in stereo!
Kind off odd constellation, I must admit ;-)
MM
There is a tv - and there is a BV