BLC Dead?

Hi try to set up my BLC as audiomaster connected to a beosound in a mainly ML setup. BV 7 as Video master, Beosound Core connected in the kithen with beolab 4000. BLC Stand alone but later connected as active kit in the garage. Connected on CAT 7 is around 30 meters away. I can reach all IP Wired.

It seems I do not have an audiomaster, i cannot connect and when i do in the garage I get a video source.

Setup as master, reffering to the right source eg on ML RADIO to TuneIn.

I have reset the power a few times because this seems to work with elephant however no result.

I can also not join the BS Core in the kitchen.

Am I doing something wrong or is it dead? also have a BLGW but that should not matter ?

Tx Chucky

Hi

When you write “BLC as audiomaster connected to a beosound“.... Does that mean that you also have an other Beosound (Masterlink Version) connected? Or is it just the Beosound Core

Søren

Took out the beosound 3000 just the Core remaining with the NL/ML LINK Converter

Tx chucky

You Can only have one AudioMaster and one Videomaster in a Masterlink system, that means that if you have the Beosound 3000 connected in option 0,1 or 2 you must setup the NL/ML converter as A.slave.