ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hey Guys,
My first post! I searched through a bunch of old threads and translated a bunch as well but I couldn't quite find what I was after.
I've purchased a 42" Beovision 5 second hand, and I am looking at upgrading the panel. I few things I've figured out based on my searching:
* The panel inside my Beovision 5 is a 42" Plasma from Panasonic
* The panel is connected to a B&O motherboard of sorts..
* If I replace the panel and want the speakers to work, it will have to be connected to the B&O motherboard
My questions are:
* How is the panel connected to the motherboard?
* Is there an easy way to use the tv independently of the B&O electronics while still utilising the active speaker?
Any help would be appreciated. Thanks Guys!
Justin
Hello Justin,
I'm looking at doing the same thing. Did you find away of doing this?
Regards Damian
Beolab 8000 x 2
Beolab 1
Beolab 2
Beovision 7-40
Beosound 9000
Beosound Ouverture
Beolit 12
it is very easy. Buy an 40" or 42" Panel LCD. Change Panel .You dont need the old motherboard, just the speaker amplifier.
Is there any way to get a breakdown of the steps? Can I keep the built in speakers? Will the beo4 still turn the stand?
thank you
Hi,
I know it's a while ago you asked. But i did the screen upgrade and still have full control via Beo4.
Read the step-by-step guide here:
https://archivedforum2.beoworld.org/forums/t/41909.aspx