ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello and good day.I just bought my first B&O products, Pair of Beolab 17 and beolab 19 sub.
I also bought Transmitter 1 to connect the speakers wireless
I have I question regardin the setup.
In the setup guide I am faced with this question.
> Repeat step A to store the next loudspeaker to the same sound channel.
Or ...
> ... continue to step B to store the next loudspeaker to a new sound channel.
Should I put each speaker on new sound channel ?
or put them all on same ?
BW
Binni
During the speaker connection process, LEFT sound channel is configured first (Step A) follow by the RIGHT sound channel (step B).
You would repeat step A if you wanted to add more than one speaker to the LEFT channel, which is not the case as you only have a pair of BL 17, one for the LEFT sound channel, and one for the RIGHT sound channel.
BS Moment, BS Core, BG 4002, BC 4500, BS1, BL18, BL19, BL8000 + RCV1, A6, M5, M3, A1, P6 (tks Botty), H5, TR1
Ok, And the Sub ?
Do I the sub to either channel ?
I doesn't matter, but specified in your documentation step 9, while configuring for stereo, the SUB is the latest speaker addition which usually occupies the Left channel of the second PL port.