Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BV 6-22 med PS3?

rated by 0 users
This post has 10 Replies | 1 Follower

Master_Geek
Not Ranked
Posts 79
OFFLINE
Bronze Member
Master_Geek Posted: Thu, Jan 14 2021 10:10 AM

Er det muligt at tilslutte min Playsatation 3 til mit BV 6-22 med et DVI-HDMI kabel?

 

Jeg har forsøgt uden held. Nogen som ved hvad problemet kan være? 

tb59427
Not Ranked
Posts 68
OFFLINE
Bronze Member
tb59427 replied on Thu, Jan 14 2021 10:25 AM

Could be the resolution (try setting the PS3 to a smaller resolution) or HDCP maybe (a stupid system to block copying of content via HDMI). I managed to connect a raspberry pi4 via HDMI->DVI easily to the BV6. So in principle it works.

Master_Geek
Not Ranked
Posts 79
OFFLINE
Bronze Member

I have changed the resolution to 720p. Can the HDCP be turned off? 

Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 14,680
OFFLINE
Gold Member

You could try a HDCP stripper like it is explained in this blog

https://www.jdhodges.com/blog/hdmi-hdcp-stripper/

MM

There is a tv - and there is a BV

Guy
Top 50 Contributor
Warwickshire
Posts 2,590
OFFLINE
Gold Member
Guy replied on Thu, Jan 14 2021 11:45 AM

I use this one with Apple TV and it strips the hdcp for my BV6-23 and 6-26.  I have also used it with ps3 in the past: https://www.amazon.co.uk/gp/product/B00NAJ4UM2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Master_Geek
Not Ranked
Posts 79
OFFLINE
Bronze Member

If i use it with my desktop PC, would I be able to use its build in DVD-player for DVD movies? Or would I have the same problem with HDCP?

tb59427
Not Ranked
Posts 68
OFFLINE
Bronze Member
tb59427 replied on Thu, Jan 14 2021 12:24 PM

You probably need to check this - I can never seem to find a logic. My MacMini (running Kodi) runs well on the DVI port. The ATV doesn't - throws an error that the receiving end doesn't support HDCP. A raspberry PI running Kodi again works very well including Netflix, Amazon Prime etc. So - you need to check it, I'm afraid.

tb59427
Not Ranked
Posts 68
OFFLINE
Bronze Member
tb59427 replied on Thu, Jan 14 2021 12:40 PM

Guy,

can you control the ATV via PUC, when you have DVI activated? My BV6-26 doesn't seem to be able to do that.

regards

-tb

Guy
Top 50 Contributor
Warwickshire
Posts 2,590
OFFLINE
Gold Member
Guy replied on Thu, Jan 14 2021 12:45 PM

Sadly no - you need a much newer 6-26 to be able to do that!

If your siri remote is the older ATV4 type (which does not have a while circle) then you can use that to control the TV's volume though!

tb59427
Not Ranked
Posts 68
OFFLINE
Bronze Member
tb59427 replied on Thu, Jan 14 2021 12:49 PM

...and I assume an SW update to get there is impossible (or doesn't fit the residual value of a BV6)....

Guy
Top 50 Contributor
Warwickshire
Posts 2,590
OFFLINE
Gold Member
Guy replied on Thu, Jan 14 2021 2:16 PM

Actually having said that my BC6-26 (type 9282) does allow the DVI to be used as a controllable STB input.  I don't use it in this manner because there is an annoying fault with the DVI input where it 'blinks' every few minutes - I think it's some sort of DVI timing handshake issue.

Page 1 of 1 (11 items) | RSS