ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I have a BeoSystem 4, two BeoSystem 3s, and a BeoVision 10. All are connected to the same sources via an Atlona matrix. Due to the difference in processing times, an echo can be heard among the BeoVision/BeoSystems. Has anyone found any settings to adjust the processing time to eliminate echo?
Maybe the Atlona box (or some Atlona add-on) could solve it? For example, the CLSO-824 has 2 audio "routes", and each route can get its own delay of 0-150 msec set from the front panel. Not sure if this is what you want because you might be forced to use the same route for more than one output, but it's worth a check. (Also in the app, see for example, page 18 of https://atlona.com/pdf/manuals/AT-UHD-CLSO-824.pdf .) Hopefully somebody else will have a B&O-centric answer: dealers who had to deal with two generations of TVs must have asked B&O for help -- they re-sell the Atlona matrix boxes and they are listed in the BV10 configuration menu after all.
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
kallasr:The Masterlink Delay Box might be an option…. ….just a guess. Ralf
….just a guess.
Ralf
Thanks for the suggestion, but that's not actually the use of the Masterlink Delay Box. The delay box is for adjusting the delay of a source that is being sent via masterlink to another B&O device. That's not the case here. Each TV is playing its own local source.
beojeff:Each TV is playing its own local source.
or do I mis-interprete your question? You're searching for a video/audio delay box, correct?
Like Willie suggested on the one and only BeoTalk Podcast: you can try and play around with the picture pre-sets between normal and game and monitor. beyond that muting the sys4 is the only option
New: Beovision Harmony, Beolab 50's, Beolab 28's, Beolab 18's, Beolab 17's, Beosound Stage & LG, Beosound 2, Beoplay M3, Beoplay A1, Beoplay Portal, Beoplay H4 gen 2, Beoplay E8 3.0
Mikipedia on YouTube: https://www.youtube.com/c/Mikipedia
Mikipedi4 on Twitch: https://www.twitch.tv/mikipedi4
Mikipedia on Intagram: https://www.instagram.com/mikipedi4/
Old: Beosound 9000 mk3, Beolab 3's, Beovision Eclipse, Beolab 1's, Beolab 2, Beovision 10-46, Overture 2300, beolab 8000's, Beolab 4000's, Beovision avant 32" etc. etc.