ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi everyone,
I need some help please. My Beovision 4 was moved to another location and by mistake the Data cable( USB to RS232) was damaged. I wonder if someone could help me with the connections into the RS232.
I have 4 cable wires and I do not have any ideea where it goes into the RS232.
Any help will be highly appreciated!
Thanks
A Very Warm Welcome to Beoworld..
I think the drawing below should help you repair your cable
Regards Keith....
Basically it is a DB 9 null modem cable.
See HERE
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Thank you for your help.
My cable has 4 wires. The diagram shows actually that only 3 cable are used. The +5V wire is not used at all?
thanks in advance for your help!
Finally, I managed to remove the front screen and PowerON/OFF manually the screen as the Serial cable is not working at all!.
Now I have another problem: the image is zoomed at max ( I see only the top left of the image) and there is not any specs about Zoom in the manual.
Any ideea what IO should to to concerning the Zoom?
thanks in advance for help!