Please help! Beolab 5 + Beolab 7 + Beocenter 2 + Beovision 4 + Beosystem 3

Hello, thank you for reading this

I've got some kind of a problem

Everything is working fine, but the sound is playing only from the center speaker (beolab 7), in speaker setup everything is set to beolab 5, when i'm in this menu i can hear noise and etc, and the lights are green.

But just after i save my settings, beolab 5 turns down, and the sound playing through the beolab 7 again, and i can do nothing! 

Got tireв of learning manuals and exploring the menus, it doesn't work for me at all

If i put the beolab 5 cable instead of beolab 7, it works fine, but as you can guess it works only for one speaker.

Also i have a round remote control (for beolab 5??) but it doesnt glow with green or red, only when i turn to radio mode, but even then the buttons are inactive..

Please help)

Where are you located?

Zermatt, Swiss, why?

Is there something i could do to make it works? or you mean i have to call b&o specialist to manage with this trouble?

And one more correction, when i'd said about connecting beolab 5 instead of beolab 7 i mean i put powerlink cable to center input on beosystem 3, and then it works fine for one speaker...

I really don't know what else to do, i think i'm missing just a little little setup somewhere, but i can't find it, help please...

I can post the photos of settings or connection if you need!

By the circle remote control I meant this thing 

But there is no text on mine, and green glows only when in radio mode...

Maybe this is the problem?

Because at my other home i just have to push the green button and my speaker activates and start playing.. 

arseniyv:

And one more correction, when i'd said about connecting beolab 5 instead of beolab 7 i mean i put powerlink cable to center input on beosystem 3, and then it works fine for one speaker...

I really don't know what else to do, i think i'm missing just a little little setup somewhere, but i can't find it, help please...

I can post the photos of settings or connection if you need!

Hello

You have to connect the bl 7 to the center input and the beolab 5 to any of the other powerlink input under.

Then in the sound menu, you have to select the type of speaker connected for each input and the role of them (front speakers if you have only one pair). Attention : if you plug the powerlink cable into the 2nd powerlink input , it doesn't mean that the 2nd powerlink input in the menu "type of speaker" correspond to the physical 2nd input.

You have to make some test until you hear the speaker's sound.

On a bv7 you are obliged to use a center speaker. If you want to use your front speaker than your center speaker you have to modify the level of the front speakers in the menu.

Sorry, I thought you had a bv7 with bs3 built in

The principle are the same I suppose for an external bs3