Beolab 4500 + Beovox 4500, connection question

Reply

Siegfried Posted: Tue, Apr 10 2018 12:56 PM

rated by 0 users

Hello everyone,

On the wall:

BeoSystem 4500 + Beolab 4500

To install:

Beovox 4500, not sure if it will be in the same room or to extend the sound into the kitchen

My thought/fantasy would be to connect them to the BV4500 AFTER the amplifier. Is this possible or will this ask to much from the amps?

Or do i connect an pre-amp to the BS4500 and then connect the BV4500 to that?

Or just plain connection to the two pin socket on the BS4500?

Grtz

Reply

Steve at Sounds Heavenly replied on Tue, Apr 10 2018 7:14 PM

rated by 0 users

Hi Siegfried,

Beomaster 4500 is a superb system as it has both amplified and pre-amp outputs, which can both be used at once.  Hence, you can connect a pair of powered Beolab 4500 speakers to the Powerlink sockets of the Beomaster with fully wired Powerlink mk.2 cables (https://soundsheavenly.com/powerlink-8-pin-din-connection/powerlink-mk-2-compatible-black-8-pin-din-cable-with-fully-wired-8-cores) as well as connecting the Beovox 4500 speakers to the 2 pin "Speaker 1" sockets of the Beomaster with regular passive speaker wires and DIN plugs: https://soundsheavenly.com/beovox-passive-unpowered-loudspeakers/

This won't cause any problems, or overload the amplifier of the Beomaster, in fact you can connect up to 2 pairs of passive Beovox speakers and several pairs of powered Beolab speakers at once without any issues.

Kind regards, Steve.