ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello,
sorry, my english is unfortunately not good
I restored a Beomaster 1900. Was in bad condition. Now everything works fine, but its left channel is a bit louder than the right one. If I pull the Plug from toneboard and make the hum test, the hum is left channel louder too, so I think, it's not the toneboard (all sliders are in good condition) Headphone is the same.
What I have done til now:
I changed all ROE Caps, the two big caps, the rectifier, that little speakerswitch, the lamps and R249/R349. The idle is now 24mV over both R. The 15V power supply has its 15V.
Any Ideas? Thank you
Andreas
Hello everybody,
the problem is solved. I found some more bad soldered points on several places. Done! And everything works fine now.
Nevertheless thank you.