ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Some people like the BEO4 remote controller and want to control all their non B&O equipment with the BEO4 remote controller, although it is not integrated with B&O. With the Lintronic -238 box you can make your BEO4 a universal remote very easily.
You have to use the box with it's own IR-receiver. You can control your devices just in the same way, as you would do with B&O integrated devices.
Step 1: You assign a Beo4 source key to each of your devices
Step2: You compile the memeory map as needed to control every device
Step3: Place the box in a position, wehe the emitted IR-signal can reach all you devices to be controlled. You can use high power IR or low power IR-emitter cables.
Step4: Place the IR-Eye wher it can be reached by the BEO4 IR-Signal
For details please refer to the integration guide document downloadable in the section "Integrating non-B&O using Lintronic"